Welcome to Ouchi brush!
中文 WeChat
Mobile station

National consultation hotline


Popular keywords: Roller Paint brush Wool brush

Contact o Qi
Recommended products

Foshan Ou Qi brush Co., Ltd.

Address: No. 70, Sanshui Road South, southwest Street, Sanshui District, Foshan.




新闻资讯News and information

Location: News and information - Company news

Use of brushes in wall decoration

In modern life, people tend to choose wallpapers in their home decoration, not only because of their rich colors and various forms, but also because they can always change frequently, and can create different home atmospheres at any time; the construction of wallpaper is not easy, small As for the editorial, the brush is one of the main construction tools. During the construction process, the brush should pay attention to some requirements and taboos.

1, because the wallpaper itself will absorb water, so the glue should be thick, so that its fluidity is reduced, in order to increase the adhesion, directly on the wall.

2, can not use a hard scraper or nylon brush, use a soft brush to gently press from top to bottom, the wallpaper is attached to the wall.

3, keep your hands clean, carefully glue, do not contaminate the surface of the wallpaper, if there is glue overflow, immediately use a sponge to remove.

4, before the paste, the edge of the wall cloth should be pasted with a double-sided tape, and the width of the wall cloth should be lengthened to prevent the edge of the wall cloth from being contaminated by glue.

5. In case the surface of the wall covering is contaminated, only one unit of the pollution can be cut according to the width.

6. Use a brush to gently remove the air bubbles. Do not use too much force to avoid damaging the fabric of the wall covering. Especially when posting the yarn-like wall covering, be careful because of its fragile surface.

7. Avoid overlapping the cut wall cloth at the corner of the corner, and do not cut the wall cloth at the corner of the corner, so as not to cause the wall cloth to be curled at the corner.

8. If there is dust on the surface, apply a soft brush or tweezers, and do not use a wet towel to avoid the spread of stains.